TET 3600™

Directions

1. Defrost overnight in a refrigerator.
2. When water is circulated with a centrifugal pump, such as with an upweller, add in front of the pump intake and the pump will disperse the algae cells.
3. When feeding into open tanks or header tanks, pre-dilute the algae 10:1 with system water.
   1. Add system water to a small bucket.
   2. Add TET 3600 and stir.
   3. DO NOT BLEND; it is unnecessary and may damage the algae cells. 
   4. Pour into larvae tank or spat.
   5. Pouring through a 20–micron screen can improve dispersion.
4. Feed according to the table below. Adjust dosage to meet the needs of your hatchery and larvae.
5. Refrigerate bottle when not in use.
6. Use within 7 days of defrosting

Typical Feeding Ration

Larvae

Feed according to shell length. Shell length on a given day is an estimate. Larviculture may run up to 20 days.

Daily Feed Rates per million larvae, for Crassostrea virginica (from FAO protocol)

Spat

Feed By Live Weight

• 0.5ml TET 3600 per gram live weight of spat per day
• Works for all sizes of spat

– OR –

Feed by Seed Count and Size

(Feeding 1 million Oyster Spat; based on FAO manual, p. 137, Table 14)

Feeding Broodstock Conditioning and Fattening

Typical Broodstock Feed Rates:

0.015–0.027 ml TET 3600 per gram wet meat weight per day

-OR-

0.15–0.5 ml TET 3600 per adult animal per day (depending on feed ration and size*)

*The required food ration for conditioning is based on the meat weight of the adults. It is usually between 2 and 4% of the mean dry meat in dry weight of algae fed per day. This is approximately equivalent to 0.015–0.027 ml TET 3600 per gram of wet meat weight.